400x600mm Flake clear Glitter Cast Acrylic Sheet
Flake Glitter Cast Acrylic Sheet
Jinan Alands Plastic Company manufacture cast acrylic sheet in China. There is 15 years old history about our factory. Most of products are used for advertising board, decorative board, aquarium, doors and windows etc.
Colors included:
--Transparent, other color can be customized
Remarks:
---Other sizes, colors can be customized.
---Length, width, diameter and thickness tolerances may vary by manufacturer.
---Certain grades available in various colors.
I. PMMA Description
PMMA ,also called acrylic, is a kind of colorless and transparent particle. It provides good transparency, chemical stability and weathering resistance. And easy to stain ,easy processing. Besides,it has beautiful appearance.
II. PMMA Characteristics
A. General Properties
1. Excellent transparency with a light transmission of 93%
2. High gloss and colorless
3. Good electrical insulation from high electrostatic charges
B. Thermal stability
During prolonged exposure to heat, the temperature should not exceed 80/85 degrees.
C. Weathering
PMMA is highly stable under UV radiation. Even several years of exposure to solar radiation, does not present any substantial variation in its properties.
The feature of our acrylic sheet products is as follows:
1,Perfect transparency and the light transmittance with 93%.
2,Excellent electrical insulation, very light in weight.
3,High plasticity, Processing and shaping easier.
4,Strong surface hardness and good weather resisting property
5,Beautiful in colour, easy to clean
Our normal size is:
1220*1830mm
1250*1850mm
1220*2440mm
1250*2450mm
1500*2100mm
1600*2600mm
2050*3050mm
We also cut the size according to customer’s requirement.
Material: Virgin PMMA material and Recycle material.
Our advantage:
--150 people in our factory, most of them worked there more than 3 years.
--Abundant experience and good production skill.
--Advanced production equipment.
--Competitive price
Technical Properties
Specific gravity | 1.19-1.20 |
Hardness | M-100 |
Water Absorbtion - 24 hours | 0.30% |
Tension | |
Coefficient of rupture | 700kg/cm2 |
Coefficient of elasticity | 2800kg/cm2 |
Bending | |
Coefficient of rupture | 1.5kg/cm2 |
Coefficient of elasticity | 2800kg/cm2 |
Transmission of Light | |
Transmission(parallel rays) | 92% |
Transmission(full rays) | 93% |
Other | |
Heat distortion temperature | 100°C |
Coefficient of linear expansion | 6*10-5cm/cm°C |
Temperature of continuous operation | 80°C |
Thermoforming Temperature range | 140-180°C |
Insulating strength | 20kv/mm |
this is our factory:
Notes:
1. acrylic sheet is likely to expand when the temperature is over 100 ° C, so the continuous temperature don’t exceed 90°C.
2.Space between acrylic sheets should be left out when construction, regarding the weight, load and temperature.
3.The surface hardness of acrylic sheet is as hard as aluminum alloy; Polish it with the abrasive material for aluminum when it is scratched in abnormal condition.
4. Acrylic sheet can cause static; clean the surface with mull dipping 1% suds.
5. Keep the warehouse dry and well-ventilated, and from fire.
6. Use elastic material such as rubber when processing base material.
finished product for our customers:
